|
High
Productivity Advanced Technology Physical Air Dryer |
End
of Corrosion, Oxidation, Wear and tear in pneumatic materials, Mechanical
failures in pneumatics, Unwanted chemical reactions
In
the Installation!
|
|
Basic Properties
of AAG Physical Air Dryers |
-
Is the product of a company...
-
producing at 2 different dewing points (AK DAB -40 °C,
AK DAC
-70 °C)
-
2
different regeneration methods (compressed air non-heated, compressed air
heated, ambient air heated),
-
a wide range of solutions consisting of a total of 207 models,
-
having as its principle to provide effective services and 2 years of
product warranty,
-
aiming for unconditional customer satisfaction
-
and producing at international safety norms.
|
|
Physical Air
Dryers |
|
Model (AK-) |
|
|
Dimensions (mm) |
| |
Çiğlenme
Noktası (Dew Point) (°C) |
Capacity |
Connection |
A |
B |
C |
|
AK -
|
DAB |
DAC |
lt/dk |
Scfm |
inch |
Height |
Width |
Depth |
| AK 33 |
-40 |
-70 |
33 |
71 |
R
1/4" |
600 |
400 |
400 |
| AK 133 |
-40 |
-70 |
133 |
283 |
R
1/4" |
1100 |
400 |
400 |
| AK 267 |
-40 |
-70 |
267 |
565 |
R
1/2" |
1700 |
450 |
400 |
| AK 400 |
-40 |
-70 |
400 |
848 |
R
1/2" |
1700 |
450 |
400 |
| AK 533 |
-40 |
-70 |
533 |
1130 |
R
1/2" |
1700 |
450 |
400 |
| AK 800 |
-40 |
-70 |
800 |
1695 |
R
3/4" |
1700 |
450 |
400 |
| AK 1000 |
-40 |
-70 |
1.000 |
2119 |
R
3/4" |
1700 |
450 |
400 |
| AK 1200 |
-40 |
-70 |
1.200 |
2543 |
R
3/4" |
1700 |
450 |
400 |
| AK 1600 |
-40 |
-70 |
1.600 |
3390 |
R 1" |
1700 |
450 |
400 |
| AK 2000 |
-40 |
-70 |
2.000 |
4238 |
R 1" |
1900 |
450 |
400 |
| AK 2667 |
-40 |
-70 |
2.667 |
5650 |
R 1" |
1900 |
450 |
400 |
| AK 3200 |
-40 |
-70 |
3.200 |
6780 |
R 1
1/2" |
1900 |
650 |
600 |
| AK 4000 |
-40 |
-70 |
4.000 |
8467 |
R 1
1/2" |
1900 |
650 |
600 |
| AK 5000 |
-40 |
-70 |
5.000 |
10.594 |
R 1
1/2" |
1900 |
650 |
600 |
| AK 6000 |
-40 |
-70 |
6.000 |
12.713 |
R 1
1/2" |
1900 |
650 |
600 |
| AK 7000 |
-40 |
-70 |
7.000 |
14.832 |
R 1
1/2" |
2100 |
1100 |
800 |
| AK 8000 |
-40 |
-70 |
8000 |
16.951 |
R 2" |
2100 |
1100 |
800 |
| AK 9500 |
-40 |
-70 |
9.500 |
20.129 |
R 2" |
2100 |
1100 |
800 |
| AK 10500 |
-40 |
-70 |
10.500 |
22.248 |
R 2" |
2100 |
1100 |
800 |
| AK 12000 |
-40 |
-70 |
12.000 |
25.427 |
R 2" |
2100 |
1100 |
800 |
| AK 16000 |
-40 |
-70 |
16.000 |
33.902 |
R 2
1/2" |
2100 |
1100 |
800 |
| AK 20000 |
-40 |
-70 |
20.000 |
42.378 |
R 2
1/2" |
2100 |
1100 |
800 |
| AK 25000 |
-40 |
-70 |
25.000 |
52.972 |
R 3" |
2600 |
1100 |
800 |
| AK 30000 |
-40 |
-70 |
30.000 |
63.566 |
R 3" |
2600 |
1200 |
800 |
| AK 40000 |
-40 |
-70 |
40.000 |
84.755 |
R 4" |
2950 |
1300 |
1100 |
| AK 50000 |
-40 |
-70 |
50.000 |
105.944 |
R 4" |
2950 |
1500 |
1250 |
| AK 75000 |
-40 |
-70 |
75.000 |
158.916 |
R 6" |
2950 |
1800 |
1450 |
| AK 95000 |
-40 |
-70 |
95.000 |
201.294 |
R 6" |
3000 |
2000 |
1600 |
| AK
120000 |
-40 |
-70 |
120.000 |
254.266 |
R 6" |
3000 |
2200 |
1750 |
| AK
160000 |
-40 |
-70 |
160.000 |
339.021 |
R 8" |
3000 |
2500 |
1950 |
NOT : Firmamız tabloda yer alan
değerlerde haber vermeksizin değişiklik yapma hakkını sahiptir.
Note : The hear regeneration (DK) air dryers with
ambient air heating are produced in model range Model 630 to Model
9600.
|
|
Utilization Areas Based on Sector and Recommended Dewing Points |
|
Above are stated the utilization areas of compressed air in major
sectors and dewing point ranges recommended in these areas. As can be
understood by this table the required dewing point in many application areas
is below -16
°C (is the lowest dewing point the cooling
compressed air dryer reaches, the dewing point at 7 bars of +2 °C).
For this reason in areas where sensitive production is required physical air
dryer and low dewing points are needed.
|
|
Operation Principle of Physical Type
Compressed Air Dryer |
|
Physical
Type Compressed Air Dryer consists of 2 pressure
chambers,
2
direction valves, 2 discharge valves and 1 regeneration
valve and 4 diffusers.
Solenoid
valves are opened by controlling
from the control panel.
The
direction valve on the side of the opened solenoid is closed and
causes the air to pass the other way. The air dries at the side it
passes and
exits again from the direction valve.
A specific portion of the
dry air passes thru the regeneration valve and expands
and absorbs
the water particles remaining at the previous drying and exits from the
open solenoid and regenerates the system. |
|
|
4 Phases of Drying |
|
1-
Left solenoid is open and direction valves
close the passage to left tube. Compressed air enters the dryer and dries in
the right tube and exits the system from the upper direction valve.
Regeneration takes place in the left tube and moisture is expelled from the
left solenoid.
2-
Pressure balancing takes place in both tubes.
3-
Right solenoid is open and direction valves
close the passage to right tube. Compressed air enters the dryer and dries
in the left tube and exits the system from the upper direction valve.
Regeneration takes place in the right tube and moisture is expelled from the
right solenoid.
4-
Pressure balancing takes place in both tubes. |
